EN
TS-MD21 Mechanical Count-Down Plug-in Timer Product Description
TS-MD21 is a Soyang mechanical countdown timer with EU Schuko plug. Unlike 24-hour cycle timers, this model offers one-shot countdown timing. Simply rotate the dial to set your desired run time, the appliance will turn ON automatically and switch OFF once time expires. It features a red power indicator light and manual override switch, simple and reliable for indoor use.
- Overview
- Recommended Products
1. Mechanical countdown timer, one-time timing function. Rotate the dial to set the duration. It counts down and cuts power automatically when finished, no repeated daily cycle.
2. Red LED power indicator. Visible status check to confirm power supply.
3. Manual ON/OFF override switch. Bypass timer function to keep the socket always powered if needed.
4. EU Schuko plug & socket, plug-and-play design. No wiring required.
5. Rated up to 16(2)A, max 3500VA. CE & GS certified by Intertek, meets European safety standards.
| Item | Parameter |
|---|---|
| Model | TS-MD21 |
| Supply Voltage | 220–240V~, 50Hz |
| Contact Rating | 16(2)A, Max. 3500VA |
| Timer Type | Mechanical Count-Down (one-shot) |
| Plug Standard | Schuko (EU) |
| Indicator | Red power LED |
| Manual Control | Manual override switch |
| Certifications | CE, GS (Intertek) |
| Environment | Indoor dry locations only |
Electric heaters, towel dryers and small heating devices
Sauna lamps, UV sterilisation lights
Bathroom ventilation fans
Charging equipment, small pumps
Any appliances requiring automatic cut-off after a set running period
1. For indoor dry use only. Not waterproof. Keep away from water splashes, steam or humid wet environments.
2. Do not exceed the maximum load of 3500VA. Check appliance power before plugging in.
3. It is a countdown timer, not a repeating 24-hour timer. The setting will not restart automatically after completion.
4. Do not daisy-chain timers. Do not plug this timer into another timer’s socket.
5. Unplug from mains before cleaning. Wipe casing with dry cloth. Do not spray liquid directly onto the unit.
6. No built-in overcurrent protection. Disconnect power immediately if the connected appliance shows abnormal operation.
Clean only with a dry soft cloth. Avoid alcohol, solvents or abrasive cleaners.
Regularly inspect the plug, socket and housing. Stop using the timer if cracks, burn marks or loose contacts are found.
Q: Will it repeat automatically every day?
A: No. This is a countdown timer. It runs once for your set time and then switches off. You need to reset the dial manually for another cycle.
Q: What is the red light for?
A: The red LED is a power indicator. It lights up when mains power is supplied to the timer.
Q: Can I use this timer for outdoor devices?
A: No. It has no splash-proof rating. Use only indoors in dry conditions.
