EN
TS-GE2 DIN Rail Digital Timer Switch Product Description
TS-GE2 is Soyang DIN-rail mounted 7-day electronic time switch. It clips directly onto standard 35mm DIN rail inside distribution boxes. Equipped with LCD display, it supports multi-segment 7-day weekly programming. Relay contact output can control lights, water pumps, signboards and many other loads, widely used for automation inside electrical cabinets.
- Overview
- Recommended Products
1. 7-day weekly cycle timer. Multiple independent ON/OFF schedules, freely selectable weekdays. Manual override (MANUAL) allows instant ON/OFF without erasing saved timer programmes.
2. Standard 35mm DIN rail clip-on mounting, quick to install & remove. Transparent protective cover shields buttons and screen against dust and accidental touch. Buttons: W+, H+, M+, C+, RES/RCL, MANUAL, R. Red ON indicator LED.
3. Built-in backup battery. Retains clock and all timer settings during power cuts. No reprogramming needed after power recovery.
4. Relay output with selectable NO / NC contacts. Can directly switch loads or send control signal to contactors.
5. Compact footprint, ideal for integration inside distribution cabinets, control panels, industrial, building, advertisement and irrigation systems.
| Item | Parameter |
|---|---|
| Model | TS-GE2 |
| Operating Voltage | 220–240V~ 50Hz |
| Contact Rating | 16(2)A, 250V~, T45 |
| Mounting | 35mm DIN rail |
| Output | Relay, NO / NC |
| Display | LCD showing weekday, hour & minute, ON indicator LED |
| Timer Cycle | 7-day weekly programmable, multiple timer segments |
| Backup Battery | Internal battery to preserve settings during blackout |
| Certifications | CE |
| Environment | Indoor dry cabinet only, not for direct outdoor rain exposure |
Building lighting: Corridor & communal lighting automation.
Signage lighting: Shop front LED signs, advertising light panels.
Garden irrigation: Water pumps and sprinkler systems.
Greenhouse & breeding: Grow lights, ventilation fans cyclic control.
Equipment automation: Scheduled power on/off for energy saving.
1. This is a DIN rail time switch, NOT plug-in timer. Hardwired installation required by qualified electrician, not plug & play.
2. Do not exceed contact rating of 16A. For high-power loads, use this timer to drive an external contactor.
3. Relay only provides timing switching. No overcurrent, short-circuit or RCD protection. A circuit breaker must be fitted upstream.
4. Designed for dry indoor distribution boxes. Not to be exposed directly to rain or condensation.
5. Isolate mains supply before wiring. Installation must be carried out by qualified electrician to avoid electric shock.
6. Backup battery ages over time. If power is off for many months, battery drains completely and all timer settings will be lost.
Wipe the transparent cover with dry soft cloth. Do NOT use wet cloth, alcohol or solvents on screen and keys.
Do not disassemble the unit. Unauthorized opening creates electric shock hazard and voids certification. Stop use immediately if faulty and cut off upstream power.
Q: Will settings be lost after power failure?
A: Built-in backup battery keeps clock & schedules for short blackouts. If power is absent for months, battery dies and all data resets.
Q: Can it drive large motors directly?
A: Contact rated 16A. Motors have high inrush current. For large motors, use this timer to trigger a contactor instead.
Q: What is MANUAL mode?
A: Manual ON/OFF override for temporary operation. Saved timer programs remain intact. When switching back to AUTO, schedules resume.
Q: Can it go into an outdoor cabinet?
A: Timer itself is non-waterproof. If installed outdoors, the enclosure must have proper IP rating and stay dry inside.
