Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile/WhatsApp
Company Name
Message
0/1000
ts mf3 mechanical 24h plug in timer product description-0

Timer

Home >  Products >  Timer

TS-MF3 Mechanical 24h Plug-in Timer Product Description

TS-MF3 is Soyang’s 24-hour cyclic mechanical plug timer with EU Schuko standard. It features a rounded rectangular housing, large rotary timing dial and red power indicator lamp. Push/pull the tabs on the dial to set repeating daily ON/OFF schedules. Fully mechanical with no battery required, simple and reliable for indoor time control.

  • Overview
  • Recommended Products
 Features & Functions

1. 24-hour cyclic mechanical timer. Adjust sliding tabs on rotary dial to set daily recurring switching programs. No battery needed.

2. Red indicator light to show power-on status.

3. EU Schuko plug and socket design, plug-and-play, no wiring required.

4. Rated 16(2)A, Max.3680W, 230V~,50Hz. CE certified, conforming to European safety standards.

 Specification Table
Item Parameter
Model TS-MF3
Supply Voltage 230V~, 50Hz
Contact Rating 16(2)A, Max.3680W
Timer Type Mechanical 24-hour repeating cycle
Plug Standard Schuko (EU)
Indicator Red power indicator
Certifications CE
Environment Dry indoor use only
 Application Scenarios

Table lamps, floor lamps and indoor decorative lighting

Aquarium lights and small aquarium equipment

Electric fans, humidifiers and battery chargers

Indoor holiday & seasonal decorative lights

 Important Notes

1. For dry indoor use only. Not waterproof. Keep away from water splashes and humid environments.

2. Do not exceed the maximum load of 3680W. Check the power rating of connected appliances before connection.

3. No backup battery. If mains power fails, the timer dial stops rotating. Reset the current time manually once power is restored.

4. Do not daisy-chain timers. Never plug one timer into another timer socket.

5. Unplug the timer before cleaning. Wipe casing with dry cloth; do not spray liquid directly onto the unit.

6. No built-in overcurrent protection. Unplug immediately if the connected appliance malfunctions.

 Maintenance & Care

Clean only with dry soft cloth. Do not use alcohol, solvents or abrasive cleaners.

Inspect plug, socket and housing regularly. Stop using if cracks, burn marks or loose contacts are found.

 FAQ

Q: Will it continue timing when there is a power cut?

A: No. It runs on mains power only. The dial stops during power outages and manual time reset is needed after power comes back.


Q: Is this model suitable for garden outdoor use?

A: No. It has no IP splash protection rating and can only be used indoors in dry locations.


Q: What does the red light mean?

A: The red lamp lights up when the timer is powered from wall socket.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile/WhatsApp
Company Name
Message
0/1000